“Took me under a minute per faucet. The strap holds tight — we had 40 mph winds and it didn't budge.”
Winterize before the first freeze · Free shipping on orders of 2+ · 30-second install, no tools

Winter-ready in 30 seconds
Don't let a frozen faucet flood your home
One unprotected outdoor spigot is all it takes. Slip on an insulated, waterproof Kartizee cover before the first freeze and keep the cold — and a costly burst pipe — out.
A $29 cover now, or a repair bill later
When water freezes inside an outdoor faucet, it expands and can crack the valve or the pipe behind your wall. You often don't find out until it thaws — and water is already pouring into the house.
- Thousands
- in water damage a single burst pipe can cause
- Minutes
- to protect every faucet — before the cold arrives
- Every winter
- reusable, so you're covered year after year
Protected in three steps
- 1
Slide it over the faucet
Open the cover, slip it over the hose bib and the handle. It flexes to fit round or square spigots.
- 2
Pull the strap snug
Cinch the built-in strap so wind and driving rain can't lift it. No tools, no tape, no wall mounts.
- 3
Leave it for the season
The insulated shell holds in warmth and keeps moisture out all winter. Remove and reuse next year.

Built to hold heat, block water
Two layers doing two jobs
A tough Oxford-cloth shell sheds rain, snow and wind, while a thick thermal layer underneath traps the ground's warmth around the faucet. Together they slow heat loss on the nights that matter most.
- Outer
- Oxford cloth
- Inner
- Thermal layer
- Closure
- Fastening strap
Will it fit my faucet?
Made for standard outdoor spigots
The flexible shell slips over most common US hose bibs and wall faucets — round or square handles, with or without a hose attached. If you're unsure, measure your faucet against the size below.
- Cover size (approx.)
- 5.5 × 7.9 in
- Fits faucet types
- Standard hose bibs & wall spigots
- Handle shape
- Round or square
- Material
- Oxford shell · thermal liner
Measurements are approximate; the flexible fit allows some variance. Not sure? Send us a photo and we'll confirm.
Better than a towel and a prayer
Homeowners who got ahead of the freeze
“Finally something that actually stays on. Fits both our front and back spigots perfectly.”
“Peace of mind for the price of a pizza. Bought a set for our rental too.”
“Easy to put on and store. Wish it came in a second color, but it does the job well.”
Common questions
Will it fit my faucet?
It's made for standard US hose bibs and wall spigots, round or square. The cover is about 5.5 × 7.9 in and flexes to fit. If you're unsure, send us a photo and we'll confirm.
How cold does it protect against?
The insulated shell slows heat loss and blocks wind and moisture to help prevent freezing. In extreme or prolonged deep freezes, also disconnect your hose and drain the faucet.
Do I still need to disconnect my hose?
Yes — always remove the garden hose first. A connected hose traps water in the faucet and can cause it to freeze even with a cover on.
Is it reusable?
Yes. Take it off in spring, store it, and reuse it every winter.
How do I install it?
Slide it over the faucet, pull the strap snug, and you're done — about 30 seconds, no tools.
How many do I need?
One per outdoor faucet. Most homes have 2–4 (front, back, garage), so a multi-pack covers the whole house.
30-day peace-of-mind guarantee
Protect your faucets with zero risk. If the covers don't fit or you're not satisfied, contact us within 30 days of delivery for a replacement or refund. Real people answer every message.